HUANUO TitanLift™ Heavy Duty Monitor Arm for Ultrawide Screens up to 49″, Holds 40 lbs, Aluminum Ultrawide Screen Desk Mount, Fully Adjustable Single Monitor Mount with Dual C-Clamp, Max VESA 100×100
$15.99
Related Products
From the brand
New Release
HUANUO Standing Desk
HUANUO Tall Monitor Arm
HUANUO monitor mount
HUANUO Triple Monitor Mount
HUANUO Monitor Wall Mount
HUANUO monitor mount
HUANUO monitor mount
Fits up to 49″ Ultrawide Screens: Ensure your monitor is compatible with the HUANUO TitanLift monitor arm by meeting all three conditions: 1) Screen size range: 17 to 49 inches, 2) Screen weight range: 6.6 to 40 lbs, 3) The back of the monitor must have VESA mounting holes with a 75x75mm or 100x100mm pitch. (For installation instructions for Samsung monitors, refer to the A+ detailed illustrations.)
Maximum Support: Crafted from high-strength aluminum alloy, reinforced VESA head 20% thicker arms and 30% wider base, this TitanLift heavy duty monitor arm supports up to 40 lbs. It has passed rigorous tests, including 50,000 cycle motion tests and a 3X load test, so you can be confident that durability comes unmatched, and your monitor will be stable for the long term.
Full Range of Motion: This ultrawide monitor arm delivers exceptional flexibility, allowing you to customize your setup for maximum comfort. Adjust the tilt from +50° to -50°, swivel 180°, rotate 360°, and extend the arm up to 24.8″. The height is adjustable up to 19.6″, ensuring you can find the most comfortable position for both work and play.
Quick 3-Step Setup: The monitor desk mount has a quick-install VESA head, so you can mount your 49” ultrawide monitor in seconds. The package includes clear, detailed instructions and labeled components for a smooth assembly. Plus, built-in cable management keeps your wires tidy and organized for a clean, streamlined workspace.
Effortless Tension Adjustment: Unlike other monitor arms that require difficult tension adjustments, the HUANUO computer monitor arm makes it easy with simple one-hand operation. Just insert the included Allen key into the side bolt and fine-tune to your desired tension.
8 reviews for HUANUO TitanLift™ Heavy Duty Monitor Arm for Ultrawide Screens up to 49″, Holds 40 lbs, Aluminum Ultrawide Screen Desk Mount, Fully Adjustable Single Monitor Mount with Dual C-Clamp, Max VESA 100×100
Add a review
$15.99
Mike –
Excellent monitor arm, incredible value
TL;DR: if you need a monitor arm for a large monitor, buy this. You won’t regret it.Full ReviewI use Ergotron monitor arms at work every day, and honestly the difference in quality between the Huanuo arm and the Ergotrons is negligible for home use.Is the Ergotron better? Yes, of course.Is the Ergotron 200 extra dollars better? Not for 99% of people.Pros:-The arm is packaged very well with closed cell foam. I love seeing closed cell foam when i open a box. It’s reusable if you ship a lot of stuff and it doesn’t make a giant mess when you cut it like polystyrene.-2 mounting options to choose from. You can use the dual clamps to clamp the arm to your desk, or you can feed the mounting bolt through a wire grommet hole and put the clamp on the bottom. That’s how I did mine and it’s perfectly solid. You can also drill a hole through your desk if there’s no grommet and then apply the clamp; really that’s probably the most secure way to do it (and technically makes it a third mounting option).-Range of motion is crazy good. It goes up high enough that I can vertically mount my 34″ ultrawide monitor. You can also tilt and rotate your monitor pretty easily once you get the tensions dialed in.-They include a rubber dipped T-handle hex wrench for tension adjustments and clamp mounting. It’s little things like this that stand out. Everyone includes some garbage allen wrench with their products but this actually feels nice, and it’s big enough that I won’t lose it. It’s easy to keep in the drawer so if I need to adjust anything it’s right at hand.-It’s very well built, everything that needs to be metal is made out of aluminum. All the non critical plastic parts still feel nice as well.-The value is insane with these arms. I got it for nearly half off (sale plus coupon), but even at full price it would 100% be worth it. And they are often on sale.At the end of the day there’s really no reason to spend hundreds of dollars more on similar arms, this one will work perfectly fine for nearly everyone. In a professional/industrial setting where you’re constantly moving and rotating monitors 24/7, yeah maybe go with the more expensive brands. But for home use the Huanuo is perfect.
Job –
Flexibility
Over the years, I’ve owned several top-flight, pricey, gas arm mounts. When I purchase a new monitor, I also get a new mount, and gift the old monitor and mount to someone who can’t afford it and needs it. While looking to purchase a monitor and mount for a small room, I searched and read every review. Because of its reviews, I chose HUANUO.EVALUATIONAssemblyAssembly is so straightforward, it can be done with eyes closed. Seriously. Assembled, the build quality is very good.LooksNot bad. The lower arm crossover on the plate post is novel to me. I like it. And the same for the upper arm crossover on the lower arm pivot mount.BaseSmart. Given its area, it should provide good support and diminished stress on the thinner composite, bamboo, and glass tops. Thumbs up for the double clamps.FlexibilityHere is where I nearly sent it back. I could not make any adjustments, and I have never encountered this problem before. After 20 minutes of frustration, stubborn persistence was waning. I picked up the instructions and found there were no troubleshooting hints or recommendations. I was ready to send the mount back. I sped through the reviews: no one cited the problem I was having. After returning from lunch, I tried again. After a wee bit, I was able to move the upper arm, and eventually any part of the mount in any direction.A fluke, I’m sure. Add a troubleshooting section or URL in the directions.FunctionalityIt does what I want to do. With a little effort, it works for a five-year-old and a granny. Thumbs up!RecommendationDesign factors should enhance ease of use and aesthetics (whatever that means). For instance, the monitor mount is slick.What makes a good-looking mount look ugly is how wires can be managed. The upper arm has a split plastic channel cover for wires. The eternal question is, “Why doesn’t the bottom arm have one that works as well?” The bottom channel is smaller in diameter and is not split to push wires into the channel. WHY? Only the designer can explain this mystery. And there are no instructions on how to accommodate a wire with a “big end” on it (in this case, the plug end to the monitor).I took a short, strong wire, inserted it into an open end, and forced one side of the cover to open enough to place the wire inside and draw it up to the other end. There was a risk in breaking the plastic channel cover. Whatever the solution (if HUANUO can provide it), change the lower arm channel. Wires hanging from the upper arm look crude.BTWI believe HUANUO sells a plate for mounting on glass top tables, desks, etc. Smart.RECOMMENDATIONNotwithstanding two difficulties — that other Amazon buyers have not encountered — and solving them, its functionality, flexibility, and price point are very good. I recommend this mount. Sincerely.
Ralph A Zuniga –
I’m thoroughly impressed with the HUANUO TitanLift monitor arm.
After trying several other arms that claimed they could support the weight of my monitors only to sag after installation, I was ready to give up on the category entirely. But I gave HUANUO a shot, and I’m glad I did. When the box arrived, I immediately noticed how sturdy the arms were. They’re made of heavy aluminum and feel solid, reliable, and well-engineered.Unlike other stands, this one was refreshingly easy to install.Minimal manual assembly was required, and the setup was straightforward. I actually bought two.I’m using them to hold two ultrawide monitors: a Dell U4025QW and a Dell U3419W.The U4025QW weighs 25.8 lbs, and the U3419W weighs 18 lbs, yet the arms support both effortlessly, with no droop, wobble. I completed the installation solo, and everything locked into place with confidence. It’s rare to find a stand that truly lives up to its specs, this one does.I’ve mounted the arms at the corners of my desk, which opened up a huge amount of usable space. The original stands that came with the monitors took up far more room, but these arms keep everything elevated, clean, and out of the way.
Tony Dick –
Really solid. Held my 25″ touchscreens with ease and facilitated the 90° rotation I needed.They need about one inch between desk and wall and are quite easy to attach with the dual clamps.They arrived very well packed.
Titihey –
Nickel
Ben Davis –
I was sceptical about sticking a 49″ monitor on this arm but its is solid and very sturdy. The monitor is stable, the adjustments are easy and it does what it says. Very happy.
SR –
it seems very sturdy and the build quality is really good for the price.
andrew wragg –
I’ve got there smaller one that hold less weight for my 27inch Montior and its fully made out of metal,This one at double the cost and rated to hold alot more weight but it is made out of plastic and metal, however, at the connecting arms where it takes the most amount of stress, it’s made out of plastic on the female side, same with the base as well on the female side.I like the method off tilting it forward and backwards. It’s on a ratchet system so you pull up and then you ease it down to your preferred levelThe spring tensioning in the arm itself allows you to freely and easily move the monitor up and down wherever you need it,It doesn’t sit as flat to the wall as a lot of other stands do and when you pull it out or up and down the assembly wobbles quite a bit.Only time will tell if it lasts or not.