Suptek Monitor Mount Gas Spring Monitor Arm Desk Mount Fully Adjustable Fits 17 20 22 23 24 26 32 inch Monitors Weight Capacity up to 22 lbs

Best Quick Buy This Year
I was inspired to do the arm set up based on some other people’s pictures. This was a quick buy and well worth the cost. It is easy to set up although the instructions could be clearer. It does exactly what the product displays says. I use it with a smaller screen vertically for when I’m watching TikTok streams. The future goal is to use it to watch comments, control music, etc. it’s perfect for when I need to review webpages, red long documents or just put more in the screen.IMPORTANT: I’m using mine on a glass desk. I wasn’t sure about the safety of doing this so I added folded newspaper/cardboard under to make sure there was a firm but glass-safe buffer on the part that fixes to the table. Be careful doing this. I don’t move the screen a lot so I’m not as worried. I do move it from time to time if I’m working and watching a stream but then want to continue watching from bed. I made sure to fold the paper thick enough so most of the stress or pressure is on the paper and not the table. Also I made sure it was wide enough so that when tightening the bracket, it never touches the glass table.

Great for the price considering the gas spring. May wobble a bit on not-so-sturdy desks.
The gas spring in this monitor mount is very good for the price. Its a VESA mount so it would work with just about anything. Clips to the desk or any surface, really. Very strong, able to hold my 32 inch monitor. My only gripe with this mount is that it does wobble a bit if theres any kind of motion going on on your desk. If you have a very sturdy, heavy duty desk, you probably wont have to worry about that too much. The clamp is easy to move, the monitor is easy to put on, and has a bunch of different adjustments and tension knobs that will allow you to get exactly what you need in terms of monitor position.

Why have I waited so long to buy one of these? Great for up against the wall use.
I have a 27 inch monitor that i use for my mini studio. I was running out of room on my desk and thought about getting a monitor stand, but was concerned that my desk was up against a wall. I looked at plenty of stands online and decided to give this one a try because of the features and it was in my budget. It came the next day and when looking at the arm, there was a yellow warning tag on it stating that it was under high pressure and to use two people to remove the strap that was holding it in a closed position. I noticed that the strap was loose and didn’t appear to be under stress. I loosened the strap a little more and let it slide off while I held the arm with both hands and slowly let it open. In my case, it wasn’t anything too sudden or violent and I had no problem with any sudden expansion.There wasn’t’ much to assemble except the bottom clamp which just hooked onto a bracket on the arm. I tried sliding the mount from the edge of my desk a could of times, but the clamp part kept coming off, So I got some duct tape to join the two pieces while I slid the bracket in place. It was easier than expected and there are 2 positions to attach the clamp to the bracket for thiner or thick desks. Mine was less than an inch and I was able to tighten it from the side of my desk instead of having to get underneath it.Since my desk is against the wall, I placed my mount to the side of where the monitor would be used. If I were to place it directly behind the monitor it would limit how far back I would be able to place my monitor. Being on the side works pretty well and allows me to move it up and down and back and forth. I use a dj mixer and found I could place it low so it looks like one unit while hiding a lot of cables, hubs and hard drives. This looks way better than the old set-up i had without the mount. Having the bracket to the side does limit some of the way to move the monitor, but I do not plan to do any major swiveling from left to right.The mount appears to be really study and has no problems supporting the monitor. There are adjustment for the tension to move the monitor up and down. There were long and short screws for a mounting plate to attach to the monitor, although there was no clear instruction on which ones to use for best results.I definitely would recommend it you’re up against a wall and want something that is pretty adjustable. This has to be one of my favorite computer accessories purchased in a long time.

personellement j’ai un g9 est le bras ne supporte pas le poids de l’ecran

Works fine just be sure of direction of clamp and double check your monitor VESA sizing. Had to get an adaptor to match my 40inch screen and then then I mounted it finally seems to be holding up though it creaks going up and down. Spins vertically easily and that’s why I chose this one so that’s great. Just need to hold it while adjusting to standing desk position from sitting because the creaking sound makes me nervous… though I’m sure my monitor is under the recommended weight. It does what it says

Not the best quality. But works if you like it cheap. I returned it because of bad quality. I was looking for an AAA product