Anker USB C Hub, 11-in-1 Docking Station Dual Monitor, 10 Gbps USB-C and USB-A Data Ports, 4K HDMI and DisplayPort, 85W Power Delivery, 2 Data Ports, Ethernet, for XPS

Works well but pay attention **REVISED**
The device has worked well for me. However potential buyers should note that the 2nd USB C port is reserved for power input from a separately purchased power supply. So the device provides only a single USB C port for attaching devices. I use the device on power from my own computer. So undocking my computer requires some careful steps in the correct sequence: (1) eject all external drives; (2) power down the external display; (3) unplug Anker from computer; (4) remove power from the computer. The device comes at a great price, though, so excellent value.*REVISION*After four months of use, the HDMI port seemed to fail–the monitor was indicating that it was not connected. I wrote to Anker support and received a reply within two hours. The reply told me how to reset the docking station. It worked. Kudoes to Anker Support!

Nice
Nice. Great. Does everything as well as I expected it to. However, having a fixed, short connection to the device means it’s not so convenient for switching between devices – depending on the account if space you have and what you’re switching between.Just something to consider, otherwise this is a great hub.

Good product, I suspect, if it works. (Also Marketing Needs Improvement)
UPDATE:Nope, it’s just the hub. :(It’s either defective or not a good product, which is unfortunate.The stutter issue has been resolved, but I can still not use the dock to push an image to my secondary monitor (1080p).I spent several hours this evening updating drivers for my Lenovo Thinkpad E15 Gen2 (AMD) without success. FYI: This laptop DOES support PD+DP through USB-C, something I confirmed before trying to go down the USB-C route in an attempt to replace my ancient Diamond USB-A dock.An image was never sent to my second monitor, whether connected via HDMI or DP through the hub.In all cases, the monitor IS recognized by Windows, so some information is being communicated, just not an image to the monitor.During every attempt, when the monitor was first plugged in, responsiveness in Windows would stutter, lag, and generally respond slowly to my KB+M inputs until, eventually, the laptop caught up and was OK.I am highly disappointed and am considering returning both products, but the USB-C dock is definitely returning.It would be nice, but I don’t need a 100W charger.My hope of replacing my current USB-A dock is diminishing at the price point I was hoping for, so we shall see if it’s up to the task of the new 2K monitor I have on the way and go from there.Original:Buyer be cautioned:The Anker 565 USB-C also needs power for itself, which is evident if you think about it, but it’s not stated anywhere that I could find, and it may not dawn on you until things aren’t working quite right.Lack of power could cause many issues I’ve read about in reviews.The issue:Mouse movement would stutter every 5-10 seconds.Though Windows recognized my HDMI monitor in Device Manager/Display settings, no image was sent to it through the Anker hub.Current theory:So, the manufacturer’s 65W USB-C charger for my laptop cannot FULLY power the hub with one connected HDMI monitor, two USBs, and Ethernet through the USB-C hub.I did not test the two USB devices (Keyboard and headset) as there was little need once the stuttering began, which was immediate.I have an Anker Nano 100W arriving tomorrow, and I will update the review once I’ve re-tested.Suggestion:My ask to Anker would be to *estimate* the power draw of their dock and list it somewhere with many warnings, etc.If they wanted to go above and beyond and add averages for peripherals and the like, that would be amazing, but if not, I would understand, as I’m sure that information could become dated fast.A power warning would have prompted me to consider the power charging situation, and I may gone with one of their docks (About a $100 increase) instead. But now that I’m annoyed, I’ll purchase a 100W charger that I can use for my work laptop and elsewhere as needed. :)They are still getting my money, but not as much.They make amazing products, but small details like this matter to me as a consumer.

On a MacBook Pro M4, not all devices connected via USB 3.2 port were discovered by the OS. (They are discovered with an older hub, and with direct dongle connection).

Works great with my PC as a desktop hub

Toutes les fonctions sont présentes dans un seul boitier : video, ethernet, alimentation.